Corner Boards Assembled

Posted by Alan on 16th April 2015 in Model Railways |

Flushed with the success of the straight boards, it was time to tackle the corner boards. As a precaution, which proved to be unnecessary, the sides were thoroughly wetted and bent, in the hope that they wouldn’t crack or split during assembly.

Tags: , , , , , , , , , ,

Straight Boards Assembled

Posted by Alan on 16th April 2015 in Model Railways |

Well, today was one of those dry days and, between two of us, the four board kits were assembled. Tim Horn‘s instructions were not specific to the boards ordered but only because they’d been modified to include the Frem0n30 endplates. However, such is the quality of his kits that instructions really aren’t necessary.

Tags: , , , , , , ,

Finishing Soldering Droppers

Posted by Alan on 20th December 2014 in Model Railways |

As mentioned previous, I’d started soldering feeder wires, often referred to as droppers, but I only got eight pieces of track finished before I packed it all away, and there it stayed!

Tags: , , , , , ,

Routing Edges

Posted by Alan on 9th March 2014 in Model Railways, Wood Butchery |

Having acquired a router and bits from Pop, it was used to round over the edges of all the soft wood. This being the first time I’ve used a router, it was surprisingly easy.

Tags: , , , , ,

Copyright © 2010-2024 A P Rogers All rights reserved.
This site is using the Desk Mess Mirrored theme, v2.5, from BuyNowShop.com.